ISSN 1004-4140
CN 11-3017/P
| Citation: |
YANG H X, ZHENG X T, CHEN Y B, et al. Research on Water Ingress Lithium Battery for Forklift Based on High Resolution Industrial CT[J]. CT Theory and Applications, 2024, 33(2): 159-166. DOI: 10.15953/j.ctta.2023.110. (in Chinese).
|
In recent years, with the development of power battery technology, an increasing number of manufacturers have favored lithium batteries as forklift power sources. However, there has been a lack of relevant research on the safety performance of lithium batteries for forklifts, especially on the nondestructive inspection of faulty batteries, which is rarely performed. Therefore, this study adopted high-resolution industrial computed tomography (CT) to study faulty lithium batteries for forklifts, scanning the internal structure and analyzing the relationship between the performance attenuation of the lithium battery and the internal structure, thereby combining with the charging and discharging conditions, to provide a solution for the nondestructive inspection of lithium batteries in forklifts.
| [1] |
侯敬波, 刘志勇, 杨朕, 等. 锂电池叉车发展现状及性能研究[J]. 工程机械与维修, 2020, 27(4): 10−15.
HOU J B, LIU Z Y, YANG Z, et al. Research on the development status and performance of lithium battery forklift[J]. Engineering Machinery and Maintenance, 2020, 27(4): 10−15. (in Chinese).
|
| [2] |
时元福. 磷酸铁锂电池在电动叉车上的应用[J]. 工程机械, 2020, 57(7): 4−7.
SHI Y F. The application of lithium iron phosphate battery in electric forklift[J]. Engineering Machinery, 2020, 57(7): 4−7. (in Chinese).
|
| [3] |
孙慧, 王春利. 平衡重式叉车改造后稳定性分析与研究[J]. 物流技术, 2016, 36(12): 85-92.
SUN H, WANG C L. Analysis and study of stability of modified counterbalanced forklift[J]. Logistics Technology, 2016, 36(12): 85-92. (in Chinese).
|
| [4] |
孙慧, 王春利, 高耀南, 等. 铅酸蓄电池电动叉车电池改造技术的研究[J]. 科技通报, 2017, 33(12): 96−98.
SUN H, WANG C L, GAO Y N, et al. Research on the transformed battery module on the electric forklift used lead-acid storage battery[J]. Bulletin of Science and Technology, 2017, 33(12): 96−98. (in Chinese).
|
| [5] |
YI W, SAURABH S, YIN J X. Analysis of manufacturing-induced defects and structural deformations in lithium-ion batteries using computed tomography[J]. Energies, 2018, 23(11): 1−22.
|
| [6] |
许晓雄, 邱志军, 官亦标, 等. 全固态锂电池技术的研究现状与展望[J]. 储能科学与技术, 2013, 2(4): 331−341.
XU X X, QIU Z J, GUAN Y B, et al. All-solid-state lithium-ion batteries: State-of-the-art development and perspective[J]. Energy Storage Science and Technology, 2013, 2(4): 331−341. (in Chinese).
|
| [7] |
马天翼, 苏素, 张宗, 等. 计算机断层扫描技术在锂离子电池检测中的应用研究[J]. 重庆理工大学学报(自然科学), 2022, 34(2): 133−139.
MA T Y, SU S, ZHNAG Z, et al. Application of computed tomography in lithium-ion battery detection[J]. Journal of Chongqing University of Technology (Natural Science), 2022, 34(2): 133−139. (in Chinese).
|
| [8] |
刘娟. 工业CT在锂离子电池失效分析检测中的应用[J]. 常州大学学报(自然科学版), 2021, 33(1): 15−19.
LIU J. Application of industrial computed tomography on the failure analysis of lithium ion batteries[J]. Journal of Changzhou University (Natural Science Edition), 2021, 33(1): 15−19. (in Chinese).
|
| [9] |
田君, 田崔钧, 王一拓, 等. 锂离子电池安全性测试与评价方法分析[J]. 储能科学与技术, 2018, 7(6): 1128−1134.
TIAN J, TIAN C J, WANG Y T, et al. Safety test and evaluation method of lithium ion battery[J]. Energy Storage Science and Technology, 2018, 7(6): 1128−1134. (in Chinese).
|
| [10] |
顾文钧. 锂电池技术在叉车上的应用分析[J]. 机械工业标准化与质量, 2014, 39(7): 39−42.
GU W J. Application analysis of lithium battery technology on forklift[J]. Standardization and Quality in the Mechanical Industry, 2014, 39(7): 39−42. (in Chinese).
|
| [11] |
YUFIFIT V, SHEARING P, HAMILTON R W. Investigation of lithium-ion polymer battery cell failure using X-ray computed tomography[J]. Electrochemistry Communications, 2011, 13(2): 608−610.
|
| [12] |
CARTER R, HUHMAN B, LOVE C T. X-ray computed tomography comparison of individual and parallel-assembled commercial lithium iron phosphate batteries at end of life after high rate cycling[J]. Journal of Power Sources, 2018, 381(1): 46−55.
|
| [13] |
王龙, 贾洲侠, 李志强, 等. 基于X射线CT和DVC方法的电子产品力学测量[J]. 强度与环境, 2019, 47(2): 49−56. DOI: 10.19447/j.cnki.11-1773/v.2019.01.008.
WANG L, JIA Z X, LI Z Q, et al. Mechanical measurements of electronic components by using X-ray CT and DVC method[J]. Structure & Environment Engineering, 2019, 47(2): 49−56. DOI: 10.19447/j.cnki.11-1773/v.2019.01.008. (in Chinese).
|
| 1. |
权朝明，陈晓文，孟祥飞，王建华，殷霄飞，杨发虎，李世斌. 储能用锂电池无损检测技术研究进展及应用展望. 电源技术. 2025(02): 292-299 .
|
Supported by: Beijing Renhe Information Technology Co. Ltd 
DownLoad: